Common Shower Valve Problems and How to Prevent Them

There is nothing more relaxing than stepping into a spotless shower.

With smooth ceramic, warm water, and flowing water, you can wash away all your stress.

However, this isn’t always the case.

You could get a sudden cold burst or a constant dripping sound.

Whilst we tend to look at the shiny brass fittings in our showers, the main issue lies deep within.

Your shower mixing valve is the engine of your bathroom. Things can quickly become frustrating when problems arise.

By identifying them early you can be sure that your walls won’t suffer from any leaking of moisture and your temperature will remain accurate.

Below you’ll find out how to identify common issues with your Shower Valve to avoid any major failure and keep your shower flowing smoothly.

Constant Dripping

A constant drip from your shower head is rarely due to an issue with your shower head itself, it is more likely to be due to the following issue.

Over time, minerals can build up on your valve components causing erosion to your sealing gaskets and ceramic discs. This causes your valve to no longer compress and allows water to escape from your valve. This will cause a constant drip.

Do not force your handle to turn. This can cause damage to your internal splines and bend your brass stems.

Just make sure you regularly clean out the cartridge. If you live in an area with lots of limescale then descaling your cartridges in a light citrus solution will help keep them sealed and not damage your o-rings.

Temperature Spikes

There is nothing worse than getting a sudden spike in your water temperature when another appliance is turned on.

This is due to your pressure balance being faulty.

Older valves can get sticky with the sliding spool or diaphragm inside. This means it will not move quickly enough to balance the cold water pressure drop. To avoid this, upgrade to a modern thermostatic valve. This will completely eliminate any temperature spikes by having a paraffin wax or bi-metal part which constantly expands and contracts to keep your water temperature to a precise level of degrees.

When designing your high-performance Kohler Bathroom, adding a kohler Shower Valve will ensure you won’t suffer with temperature shocks. This has been designed to help balance your pressure.

Weak Flow

A lack of flow can often be blamed on the water pressure from the mains. However, this can often be due to:

Sediment build up, copper soldering flux and mineral build-up blocking your micro screens. Your stop supplies can also vibrate causing them to partially close. Lastly, your kohler shower arm can become blocked with scale.

By regularly removing your escutcheon and cleaning your check stops you can help ensure your flow is good. Having a real kohler shower arm will ensure you do not suffer from blockages.

Smooth Operation

To create a durable wet room your components need to work together.

A mismatched valve can cause your stem to get stuck. By fitting a generic valve handle to your brass cartridge, your cartridge stem will bend over time due to the differing torque. This can cause serious leaks within your stud wall.

By using a genuine Kohler Valve with a matching Kohler Valve & Trim set, your valve will rotate smoothly. This will ensure your rubber gaskets are sealed and you will have a smooth operation.

This will ensure your Kohler Bathroom Design is intentional. You will have a smooth design with a strong brass build underneath your tiles.

In mountainous areas, luxury homes and remote properties throughout Paro, Thimphu and Punakha, you will suffer from unpredictable water supply and extreme freezing temperatures. It is vital that your plumbing is not compromised. By using genuine parts, you can ensure you are using components designed for cold temperatures. By sourcing from authorised suppliers such as Kohler Bhutan, you can ensure you have the correct depth of rough in, easy to replace cartridges, and local support.

Issue Checklist

Symptom Cause Solution

Constant Dripping Eroded Ceramic Disc or Damaged Rubber Seat Replace Cartridge. Flush Supply

Temperature Spikes: Sticky Pressure Balance Spool. Upgrade To Thermostatic Mixing Chamber

Sticky Handle: Heavy Mineral Buildup. Soak Cartridge In Descaling Agent And Lubricate O-Rings

Chattering, Vibrating Loose Check Valve. Water Hammer: Add Water Hammer Arrestors. Tighten Stop Screws.

Weak Water Flow: Clogged Inlet Screens Or Scale Build-Up on Shower Arm Check Valve Filters. Clean Horizontal Pipes.

 

FAQ

Can I repair my Shower Valve without cutting my tiles?

Yes. All professional systems are designed to be easily accessed from the front. Simply by removing your handle and trim, your cartridge, pressure balance spool and check stops can be removed through the plaster guard.

How often do I need to check my shower cartridges?

High quality ceramic disc cartridges should last up to 8-12 years depending on your water supply. If you have very hard water or no softened bore well we would recommend checking and cleaning your screens every 3-5 years.

Why am I getting water leaking out from behind my escutcheon.

This is generally down to the foam gasket behind your trim having become degraded. Water from your shower will then leak through from behind. Or if your valve is leaking at the threaded adaptor.

What is the difference between a pressure balanced and thermostatic valve.

The pressure balanced valves will only give you control over the pressure of the water. This will maintain a balanced temperature but you won’t have control over how much water. The thermostatic valves will give you full control over your temperature and water flow. You will have 2 dials to set your temperature accurately to the degree you want and control your water from a trickle to full flow.

Where can I purchase real Kohler Valve cartridges and trims?

Home owners can purchase genuine brassware, pressure balanced valves and trims from authorised Kohler Bhutan showrooms.